Tftp-Server Enable - Accton Technology ES4710BD User Manual

EES4710BD 10 Slots L2/L3/L4 Chassis Switch
Usage Guide: The command provides command line prompt messages. If the user enters a
command like copy <filename> tftp:// or copy tftp:// <filename> and presses Enter, the following
prompt will appear:
tftp server ip address>
tftp filename>
This prompts for the TFTP server address and file name.
Example:
（1）Saving the mirror in FLASH to TFTP server 10.1.1.1:
Switch#copy nos.img tftp:// 10.1.1.1/ nos.img
（2）Getting the system file nos.img from TFTP server 10.1.1.1:
Switch#copy tftp://10.1.1.1/nos.img nos.img
（3）Saving the active configuration file:
Switch#copy running-config startup-config
Related command: write

5.5.2.2.9 tftp-server enable

Command: tftp-server enable
no tftp-server enable
Function: Starts TFTP server, the "no ftp-server enable" command shuts down TFTP server and
prevents TFTP user from logging in.
Default: TFTP server is not started by default.
Command mode: Global Mode
Usage Guide: When the TFTP server function is enabled, the switch can still perform tftp client
functions. TFTP server is not started by default.
Example: Enabling the TFTP server service.
Switch#config
Switch(Config)#tftp-server enable
Related command: tftp-server timeout
131