Vlan Configuration; Vlan Configuration Task Sequence - Accton Technology ES4710BD User Manual

conveniences:
Improved network performance
Savings on network resources
Simplified Network Management
Lowered network cost
Enhanced network security
VLAN and GVRP (GARP VLAN Registration Protocol) are defined by IEEE 802.1Q and
implemented by ES4710BD. This chapter will describe the use and configuration of VLANs and
GVRP in detail.

9.2 VLAN Configuration

9.2.1 VLAN Configuration Task Sequence

1. Creating or deleting VLAN
2. Specifying or deleting VLAN name
3. Assigning Switch ports for VLAN
4. Setting the port type for the switch
5. Setting Trunk port
6. Setting Access port
7. Enabling/Disabling VLAN ingress rules on ports
1. Creating or deleting VLAN
Command
Global Mode
vlan <vlan-id>
no vlan <vlan-id>
2. Specifying or deleting VLAN name
Command
VLAN Mode
name <vlan-name>
no name
3. Assigning Switch ports for VLAN
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
Explanation
Creates/deletes a VLAN or enters VLAN Mode
Explanation
Sets or deletes a VLAN name
203