Tftp Troubleshooting Help - Accton Technology ES4710BD User Manual

send file
150 Opening ASCII mode data connection for nos.img.
226 Transfer complete.
close ftp client.
The following is the message displays when files are successfully received. Otherwise, please
verify link connectivity and retry "copy" command again.
220 Serv-U FTP-Server v2.5 build 6 for WinSock ready...
331 User name okay, need password.
230 User logged in, proceed.
200 PORT Command successful.
recv total = 1526037
************************
write ok
150 Opening ASCII mode data connection for nos.img (1526037 bytes).
226 Transfer complete.
If the switch is upgrading a system file or the system start up file through FTP, the switch must
not be restarted until "close ftp client" or "226 Transfer complete" is displayed, indicating the
upgrade was successful, otherwise the switch may be rendered unable to start. If the system file
and system start up file upgrade through FTP fails, please try to upgrade again or use the
BootROM mode to upgrade.

5.5.2.4.5 TFTP Troubleshooting Help

When upload/download system file with TFTP protocol, the connectivity of the link must be
ensured, i.e., use the "ping" command to verify the connectivity between the TFTP client and server
before running the TFTP program. If ping fails, you will need to check for appropriate
troubleshooting information to recover the link connectivity.
The following is the message displayed when files are successfully transferred. Otherwise,
please verify link connectivity and retry "copy" command again.
nos.img file length = 1526021
read file ok
begin to send file,wait...
file transfers complete.
close tftp client.
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
138