Ip Access Extended; Ip Access Standard; Ip Access-Group - Accton Technology ES4710BD User Manual

Command: firewall default {permit | deny}
Function: sets firewall default action.
Parameters: "permit" allows packets to pass through; "deny" blocks packets.
Command mode: Global Mode
Default: The default action is "permit".
Usage Guide: This command affects incoming IP packets on the port only, other packets are
allowed to pass through the switch.
Example: setting firewall default action to block packets.
Switch(Config)#firewall default deny
12.2.2.5

ip access extended

Command: ip access extended <name>
no ip access extended <name>
Function: Creates a name-based extended IP access list; the "no ip access extended <name>"
command delete the name-based extended IP access list
Parameters: <name> is the name for access list, the character string length is 1 – 8, a pure digit
sequence is not allowed.
Command mode: Global Mode
Default: No IP address is configured by default.
Usage Guide: When this command is run for the first time, only an empty access list with no entry
will be created.
Example: Creating an extensive IP access list named "tcpFlow".
Switch(Config)#ip access list extended tcpFlow
12.2.2.6

ip access standard

Command: ip access standard <name>
no ip access standard <name>
Function: Creates a name-based standard IP access list; the "no ip access standard <name>"
command delete the name-based standard IP access list (including all entries).
Parameters: <name> is the name for access list, the character string length is 1 – 8.
Command mode: Global Mode
Default: No IP address is configured by default.
Usage Guide: When this command is run for the first time, only an empty access list with no entry
will be created.
Example: Creating a standard IP access list named "ipFlow".
Switch(Config)#ip access list standard ipFlow
12.2.2.7

ip access-group

EES4710BD 10 Slots L2/L3/L4 Chassis Switch
273