Client's Default Gateway Configuration; Client Dns Server Configuration - Accton Technology ES4710BD User Manual

14.6.2.2 Client's default gateway configuration

Click "DHCP configuration", "DHCP server configuration", "Client's default gateway
configuration" to configure the default gateway for DHCP client. Same as CLI command 14.2.2.4:
DHCP pool name – selects one DHCP address pool
Gateway – default gateway, default gateway's IP address and DHCP client's IP address in the
same segment. The switch maximum supports 8 gateway addresses. The headmost configured
gateway address, or address 1, has the highest priority, then address2, address3, etc.
Example: Select DHCP pool name as 1, configure Gateway 1 as 10.128.1. 3, configure Gateway 2
as 10.128.1.100 and then click the Apply button to apply this configuration to the switch.

14.6.2.3 Client dns server configuration

Click "DHCP configuration", "DHCP server configuration", "Client DNS server configuration" to
configure the DNS server for the DHCP client. Same as CLI command 14.2.2.5:
DHCP pool name – choose one DHCP address pool
DNS server – DNS server. The system maximum supports 8 DNS server addresses. The
headmost configured DNS server address, address1, has the highest priority, then address2,
address3, etc.
Example: Choose DHCP pool name as 1. Configure DNS server 1 as 10.1.128.3. Click the Apply
button to apply this configuration to switch.
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
319