Table of Contents
Advertisement
Click RIP configuration to open RIP configuration including:
Enable RIP: enable RIP including
Enable RIP: enable
Enable port to receive/transmit RIP packet
RIP parameter configuration (optional) including:
Enable imported route
Metricin/out configuration
RIP port imported route
RIP mode configuration
RIP timer configuration
18.5.2.1 RIP configuration
18.5.2.1.1 Enable RIP
Click "Enable RIP" to enter configuration page. Equivalent to CLI command 18.3.2.2.17.
Enable RIP: Enables RIP and Disables RIP
Example: Select Enable RIP and click Apply button to enable RIP.
18.5.2.1.2 Enable port to receive/transmit RIP packet
Click "Enable port" to enter configuration page for receiving/transmitting RIP packet. Equivalent to
CLI command 18.3.2.2.11
Port: specify port
Enable port to receive/transmit RIP packet: set or cancel
Example: Select port valn1 and cancel. Click Apply to cancel receive/transmit packets on vlan1
18.5.2.2 RIP parameter configuration
18.5.2.2.1 Enable imported route
Click "Enable imported route" to enter the configuration page. Equivalent to CLI command
18.3.2.2.13
Import other routing protocol to RIP: includes Static, OSPF, BGP
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
446
Advertisement
Table of Contents
Troubleshooting
