Function: Displays information about mirror source/destination ports.
Command mode: Admin Mode
Usage Guide: This command displays the mirror source port(s) and destination port currently
configured.
Example:
Switch#show monitor
7.2.4.5.2 Device Mirroring Troubleshooting Help
If a problems occurs configuring port mirroring, please check the following first for causes:
Whether the mirror destination port is a member of a trunk group or not, if yes, modify the
trunk group.
If the throughput of mirror destination port is smaller than the total throughput of mirror
source port(s), the destination port will not be able to duplicate all source port traffic; please
decrease the number of source ports, duplicate traffic for one direction only or choose a port
with greater throughput as the destination port.
7.3 Port Configuration Example
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
Fig 7-1 Port Configuration Example
173