Exit Current Web Configuration; Save Current Running-Config; Reboot; Reboot With The Default Configuration - Accton Technology ES4710BD User Manual

EES4710BD 10 Slots L2/L3/L4 Chassis Switch

5.6.7.2 Exit current web configuration

Users should quit the web-login by clicking "Switch maintenance" and "Exit current web
configuration."

5.6.7.3 Save current running-config

Users should save the current running-config by clicking "Switch maintenance", "Save current
running-config" and "Apply". Please refer to the CLI command 5.1.14.

5.6.7.4 Reboot

Users should reboot the switch by clicking "Switch maintenance." Please refer to the CLI command
5.1.10.

5.6.7.5 Reboot with the default configuration

Users should clear all current configurations and reboot the switch again by clicking "Switch
maintenance" and "Reboot with the default configuration."

5.6.8 Telnet server configuration

On the left directory of the root page, users may click "Telnet server configuration" and configure
the Telnet server configuration nodes through web interface.

5.6.8.1 Telnet server user configuration

Users should click "Telnet server configuration" and "Telnet server user configuration" to configure
Telnet service start-up and users information. Please refer to the CLI command 5.2.2.3.3 and
5.2.2.3.5. Words and phrases are explained in the following:
149