Switchport Port-Security Timeout; Switchport Port-Security Mac-Address - Accton Technology ES4710BD User Manual

Accton 10 slots l2/l3/l4 chassis switch
Table of Contents

Advertisement

Function: Locks the port. When a port is locked, the MAC address learning function for the port
will be disabled: the "no switchport port-security lock" command restores the MAC address
learning function for the port.
Command mode: Interface Mode
Default: Ports are not locked by default.
Usage Guide: The port locking command can only be executed after MAC address binding function
has been enabled. When the port locking command has been executed, the dynamic MAC learning
function for the port will be disabled.
Example: Locking port1.
Switch(Config)#interface Ethernet 1/1
Switch(Config-Ethernet1/1)#switchport port-security lock

8.5.1.2.2.4 switchport port-security timeout

Command: switchport port-security timeout <value>
no switchport port-security timeout
Function: Sets the timer for port locking; the "no switchport port-security timeout" command
restores the default setting.
Parameters: < value> is the timeout value, the valid range is 0 to 300 seconds..
Command mode: Interface Mode
Default: Port locking timer is not enabled by default.
Usage Guide: The port locking timer function is a dynamic MAC address locking function. MAC
address locking and conversion of dynamic MAC entries to secure address entries will be performed
on locking timer timeout. The MAC address binding function must be enabled prior to running this
command.
Example: Setting port1's locking timer to 30 seconds.
Switch(Config)#interface Ethernet 1/1
Switch(Config-Ethernet1/1)# switchport port-security timeout 30

8.5.1.2.2.5 switchport port-security mac-address

Command: switchport port-security mac-address <mac-address>
no switchport port-security mac-address <mac-address>
Function: Adds a static secure MAC address; the "no switchport port-security mac-address"
command deletes a static secure MAC address.
Command mode: Interface Mode
Parameters: <mac-address> stands for the MAC address to be added/deleted.
Usage Guide: The MAC address binding function must be enabled before static secure MAC
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
190

Advertisement

Table of Contents
loading

Table of Contents