Accton Technology ES4710BD User Manual page 512

3) Configure expanded 802.1x function: for the switch.
Command
Global Mode
dot1x macfilter enable
no dot1x macfilter enable
dot1x accept-mac
<mac-address> [interface
<interface-name>]
no dot1x accept-mac
<mac-address> [interface
<interface-name>]
dot1x eapor enable
no dot1x eapor enable
3. Supplicant related property configuration
Command
Global Mode
dot1x max-req <count>
no dot1x max-req
dot1x re-authentication
no dot1x re-authentication
dot1x timeout quiet-period
<seconds>
no dot1x timeout quiet-period
dot1x timeout re-authperiod
<seconds>
no dot1x timeout
re-authperiod
dot1x timeout tx-period
<seconds>
no dot1x timeout tx-period
Admin Mode
dot1x re-authenticate
[interface <interface-name>]
4. Authentication Server (RADIUS server) related property configuration
1) Configure RADIUS authentication key.
Command
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
Explanation
Enables the 802.1x address filter function in the switch; the
"no dot1x macfilter enable" command disables the 802.1x
address filter function.
Adds 802.1x address filter table entry, the "no dot1x
accept-mac" command deletes 802.1x filter address table
entries.
Enables the EAP relay authentication function in the switch;
the "no dot1x eapor enable" command sets EAP local end
authentication.
Explanation
Sets the number of EAP request/MD5 frame to be sent before
the switch re-initials authentication on no supplicant
response, the "no dot1x max-req" command restores the
default setting.
Enables periodical supplicant authentication; the "no dot1x
re-authentication" command disables this function.
Sets time to keep silent on port authentication failure; the "no
dot1x timeout quiet-period" command restores the default
value.
Sets the supplicant re-authentication interval; the "no dot1x
timeout re-authperiod" command restores the default
setting.
Sets the interval for the supplicant to re-transmit EAP
request/identity frame; the "no dot1x timeout tx-period"
command restores the default setting.
Enables IEEE 802.1x re-authentication (no wait timeout
requires) for all ports or a specified port.
Explanation
511