Show Ip Igmp Interface; Debug Ip Igmp Event - Accton Technology ES4710BD User Manual

Switch#show ip igmp groups
IGMP Connect Group Membership (1 group(s) joined)
Group Address Interface
239.255.255.250 Vlan123
Switch#
Displayed information
Group Address
Interface
Uptime
Expires
Last Reporter

19.6.4.1.2 show ip igmp interface

Command: show ip igmp interface [<ifname>]
Function: Displays IGMP related information on the interface
Parameters: <ifname> is the interface name, i.e., displays IGMP information of the specified
interface.
Default: Not displayed.
Command mode: Admin Mode
Example: Displaying IGMP information of Ethernet interface vlan1.
Switch # show ip igmp interface vlan1
Vlan1 is up, line protocol is up
Internet address is 192.168.1.11, subnet mask is 255.255.255.0
IGMP is enabled, I am querier
IGMP current version is V2
IGMP query interval is 125s
IGMP querier timeout is 265s
IGMP max query response time is 10s
Inboud IGMP access group is not set
Multicast routing is enable on interface
Multicast TTL threshold is 1
Multicast designed router (DR) is 192.168.1.22
Muticast groups joined by this system: 0

19.6.4.1.3 debug ip igmp event

Command: debug ip igmp event
Function: Enables the debug function for displaying IGMP events: the "no" format of this
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
Uptime Expires
02:57:30 00:03:36
Explanation
Multicast group IP address
Interface of the multicast group
The up time of the multicast group
Rest time before the multicast group timeouts
The host's last reported the multicast group
499
Last Reporter
123.1.1.2