Web Management; Static Route; Static Route Configuration; Rip Configuration - Accton Technology ES4710BD User Manual

18.5 WEB MANAGEMENT

Click "Route configuration" to open "routing protocol configuration" to configure the items as
follows:

Static route configuration

RIP configuration

OSPF configuration
Show ip route

18.5.1 Static route

Click "Static route configuration" to configure static route
18.5.1.1 Static route configuration
Click "Static route configuration" to enter the configuration page. Equivalent to CLI command
18.2.3.2.1 including.
Destination IP address
Destination network mask
Gateway ip: the IP address of next-hop
Priority: routing priority level
Operation type: Add or Remove
Example: Adding a static route. Enter the destination IP as 1.1.1.0, mask as 255.255.255.0, gateway
as 2.1.1.1. select Add then click Apply button.
18.5.2 RIP configuration
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
445