received a rip packet from
rip packet cmd : 2
18.3.2.2.23 debug ip rip recv
Command: debug ip rip recv
no debug ip rip recv
Function: Enables the RIP packet debug function for receiving: the "no debug ip rip recv"
command disables the debug function.
Default: Debug is disabled by default.
Command mode: Admin Mode
Example:
Switch#debug ip rip rec
start at 230*********************
received a rip packet from
rip packet cmd : 2
00:03:59:
start at 238*********************
received a rip packet from
rip packet cmd : 2
00:03:59:
rip receive response
packet head 14872964; packet end 14872984
recv packets from
packet header: cmd: response, version: 1
no.
dest
1:
159.222.0.0
18.3.2.2.24 debug ip rip send
Command: debug ip rip send
no debug ip rip send
Function: Enables the RIP packet debug function for sending: the "no debug ip rip send"
command disables the debug function.
Default: Debugging is disabled by default.
Command mode: Admin Mode
Example:
Switch#debug ip rip send
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
159.226.42.1
version:1
159.226.42.1
version:1
11.11.11.2
version:1
11.11.11.2
dest_mask
0.0.0.0
gatedway metric
0.0.0.0
1
399