Trunk Port Configuration; Vlan Setting For Trunk Port - Accton Technology ES4710BD User Manual

9.5.1.4

Trunk port configuration

Click "Vlan configuration", "Vlan configuration", "Trunk port configuration" to open Trunk port
VLAN configuration list.

9.5.1.4.1 Vlan setting for trunk port

Click "Vlan configuration", "Vlan configuration", "Trunk port configuration", "Vlan setting for
trunk port" to set up trunk port VLAN type:
Set trunk native vlan. Equals to CLI command 9.2.2.7:
Port: specifies port
Trunk native vlan: specifies native vlan id
Operation type: Sets native vlan means to add new VLAN; Remove native vlan means to
remove original native vlan.
Example: Select port 2/8, set up Trunk native vlan as 100, select Operation type as Set native vlan
and click the Set button so that the native vlan setting of port 2/8 will be vlan 100.
Set trunk allow vlan. Equals to CLI command 9.2.2.6:
Port: specified port
Trunk allow vlan list: specifies allow vlan id list
Operation type: Sets allow vlan means to add new allow VLAN; Remove allow vlan
means to delete allow vlan
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
220