Table of Contents
Advertisement
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
Click "Vlan configuration", "Vlan configuration", "Enable/Disable Vlan filter rule" to open VLAN
ingress configuration list to setup VLAN filter function.
9.5.1.6.1 Disable Vlan ingress rule
Click "Vlan configuration", "Vlan configuration", to Enable/Disable Vlan ingress rule.
Example: Select Ethernet port 1/1 and click the Apply button and the VLAN ingress rule of port 1/1
will be disabled. Select Default button to enable the VLAN ingress rule.
9.5.2 GVRP configuration
Click "Vlan configuration", "GVRP configuration" to open the GVRP configuration management
list to manage GVRP function of the switch.
9.5.2.1 Enable global GVRP
Click "Vlan configuration", "GVRP configuration", "Enable global GVRP" to enable/disable the
global GVRP function of the switch. Equals to CLI command 9.3.2.5.
Example: Select Enable GVRP and click Apply button to enable global GVRP function.
9.5.2.2 Enable port GVRP
Click "Vlan configuration", "GVRP configuration", to enable/disable port the GVRP function of the
switch. Equals to CLI command 9.3.2.5.
Example: Select Ethernet port 1/1, select Enable GVRP and click Apply button then the GVRP
function of port 1/1 will be enabled. Note: only the Trunk port can enable GVRP function.
9.5.2.3 GVRP configuration
222
Advertisement
Table of Contents
Troubleshooting
