Global Rip Configuration - Accton Technology ES4710BD User Manual

18.3.2.2.3
RIP authentication type: sets up RIP authentication type. Text means text authentication; md5
means normal MD5 authentication; Cisco MD5 means Cisco MD5 authentication; cancel
means back to default. Equivalent to CLI command 18.3.2.2.4.
Example:

18.5.2.2.4 Global RIP configuration

Click "RIP mode configuration" to enter the configuration page.
Set receiving/sending RIP version for all ports: sets up receiving/sending RIP version for all
port, including version1, version2 and Cancel means default. Equivalent to CLI command
18.3.2.2.19
Auto-summary: configures route aggregate function including set and cancel. Equivalent to
CLI command 18.3.2.2.1
Rip priority (0-255): sets up the route priority level of RIP protocol. Equivalent to CLI
command 18.3.2.2.16
Set default route cost for imported route (1-16): sets up default route cost for imported route
value. Equivalent to CLI command 18.3.2.2.2
Rip checkzero: sets up check zero of RIP packet, including set and cancel. Equivalent to CLI
command 18.3.2.2.15
Rip broadcast: sets up all ports send RIP BC or MC packets of the L3 switch, including set and
cancel. Equivalent to CLI command 18.3.2.2.14
Example:
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
448