Front Panel - Indicator; Front Panel Port Description; Front Panel - Reset Button - Accton Technology ES4710BD User Manual

1.4.2.4.2

Front Panel - Indicator

The following table describes the front panel indicators for the EM4700BD-2XG-XENPAK:
Table 1.8 Description of the EM4700BD-2XG-XENPAK indicators
LED Panel
Indicator Symbol
Power
PWR
Indicator
Operation
RUN
indicator
XENPAK port indicator
Status
Link
indicator:
Transmission
Act
Indicator
1.4.2.4.3

Front Panel Port Description

EM4700BD-2XG-XENPAK provides 2 XENPAK 10Gb fiber transceiver slots;
Port Type
XENPAK
1.4.2.4.4 Front Panel – Reset Button
The EM4700BD-2XG-XENPAK provides a RESET button for resetting the board.
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
Status
On (green)
Off
On (Green, blinks at 1 Hz)
On (Green, blinks at 8 Hz)
On (Yellow, blinks at 8 Hz)
On (Red, blinks at 8 Hz)
Off
On (Green)
Off
Blinking (Green)
Table 1.9 XENPAK port descriptions
XENPAK-SC transceiver (10GBASE-LR LAN-PHY)
(Agilent HFCT-701XB, LAN mode, wavelength 1310nm)：
62.5/125 µm multi-mode fiber (MMF): 300m
9/125 µm single-mode fiber (SMF): 10Km
45
Card powered.
Card powered off
Card operating normally
System is loading (Booting after cards hot
swapping)
System is shutting down (Shutting Down
after SWAP button pressed)
Malfunction status
Card is powered off and can be removed.
Network connection
transceiver is normal
No network
XENPAK transceiver
Sending or receiving data
Specification
Description
on XENPAK
connection present on