Table of Contents
Advertisement
Fast EtherHub 3500 System User's Guide
Configuring Port Parameters
Use the Port Configuration menu under the Configuration
Panel to configure the ports for any hub in the stack. Select the
port type for the required hub from the following menu.
Port Configuration: Port Selection Menu
Return to Previous Panel
Select port to get configuration
Hub ID |
----------+------------------------
1
| 1 through 12 SEM
2
| 1 through 12 SEM
3
| 1 through 12 SEM
4
| 1 through 12 SEM
5
| 1 through 12 SEM
6
| 1 through 12 SEM
Display or work with hub 1 ports 1 through 12 configuration.
Use arrow keys to move. <Enter> to confirm.
<Ctrl+T> to return to Main Menu.
Figure 4-14 Port Configuration: Port Selection Menu
Configuring the System
Port ID
4-25
Advertisement
Table of Contents
