Table of Contents
Advertisement
Chapter 3: Hardware Reference
The Fast SwitcHub-2se is a highly reliable network switch that complies with
IEEE 802.3 (10BASE-T) and IEEE 802.3u (100BASE-TX and 100BASE-FX)
specifications. This switch delivers superior performance compared to the
bridge and router solution, and at a much lower cost. By confining local traffic
to the originating segment, and only forwarding cross-segment traffic to the
other port, this switch meets the requirements for Ethernet and IEEE 802.3
networks.
This chapter describes the hardware features of the Fast SwitcHub-2se. For
easier management and control of the switch, familiarize yourself with the
display indicators, ports and configure button. Front and rear panel illustrations
in this chapter display the unit's LED indicators, configure button and ports.
Front Panel
The unit's front panel provides a simple interface for configuring or monitoring
the switch. It includes a configure button, power indicator, display mode
indicators, port status indicators, and a statistical display for network traffic as
shown below.
Figure 3.1
The Fast SwitcHub-2se Front Panel
Hardware Reference
3-1
Advertisement
Table of Contents
