Dhcp Server Configuration Commands - Accton Technology ES4626 Management Manual

(3) Configure manual DHCP address pool parameters
Command
DHCP Address Pool Mode
hardware-address <hardware-address>
[{Ethernet | IEEE802|<type-number>}]
no hardware-address
host <address>
<prefix-length> ]
no host
client-identifier <unique-identifier>
no client-identifier
client-name <name>
no client-name
3. Enable logging for address conflicts
Command
Global Mode
ip dhcp conflict logging
no ip dhcp conflict logging
Admin Mode
clear ip dhcp conflict <address | all>
11.2.2

DHCP Server Configuration Commands

11.2.2.1 bootfile
Command: bootfile <filename>
no bootfile
Function: Set the file name for DHCP client to import on bootup; the "no bootfile "
command deletes this setting.
Parameter: <filename> is the name of the file to be imported, up to 255 characters are
allowed.
Command Mode: DHCP Address Pool Mode
Usage Guide: Specify the name of the file to be imported for the client. This is usually
used for diskless workstations that need to download a configuration file from the server
Explanation
Specifies the hardware address when
assigning address manually
Specifies the IP address to be assigned
[<mask> |
to the specified client when binding
address manually
Specifies the unique ID of the user when
binding address manually
Configures a client name when binding
address manually
Explanation
Enables logging for DHCP address to
detect address conflicts
Deletes a single address conflict record or
all conflict records
275