Trunk Port Configuration; Vlan Setting For Trunk Port - Accton Technology ES4626 Management Manual

Port – Specify the port
Type – Specify port type: access, trunk. See the equivalent CLI command at 5.2.2.5
Vlan ingress rules – Enable or disable vlan ingress rule. See the equivalent CLI
command at 5.2.2.8
For example: Select port Ethernet1/1; select Type to Trunk; select Enable Vlan
ingress rules, and then click Apply. The configuration is applied on the switch.
The port mode information is shown in Port mode configuration window:

5.5.1.4 Trunk port configuration

Click Vlan configuration, Vlan configuration, Trunk port configuration. Users can
configure trunk ports.
5.5.1.4.1
Click Vlan configuration, Vlan configuration, Trunk port configuration, Vlan setting for

Vlan setting for trunk port

165