CLI command at 4.5.1.2.2.5:
Port – Specify the port
Port security MAC –Port security MAC address
Operation type – add static security address; Remove static security address
For example: Select port Ethernet1/1; set MAC address to 00-11-11-11-11-11; Select
add static security address, and then click Apply. The configuration is applied on the
switch.
4.6.2.2.5
Click MAC address table configuration, MAC address binding configuration, Lock port,
Clearing port MAC. Users can clear the dynamic MAC address of the specified port. See
the equivalent CLI command at 8.5.1.2.2.6:
Mac – Specify the MAC
Port – Specify the port
For example: Select port Ethernet1/1, and then click Apply. The MAC address of the
port Ethernet1/1 is deleted. Note: This feature is only supported on the secure port.
4.6.2.3 MAC binding attribution configuration
Click MAC address table configuration, MAC address binding configuration, MAC
binding attribution configuration. Users can configure secure port attributes.
4.6.2.3.1
configuration
Click MAC address table configuration, MAC address binding configuration, MAC
binding attribution configuration, Maximum port security IP number configuration. Users
can configure maximum port security IP number. See the equivalent CLI command at
Clearing port MAC
Maximum
port
security
142
IP
number