Dynamic Mac Converting; Enable Port Security Timeout; Binding Mac - Accton Technology ES4626 Management Manual

Lock port. User can lock the secure port. See the equivalent CLI command at 4.5.1.2.2.3
Port – Specify port
For example: Select port Ethernet1/1, and then click Apply. The port Ethernet1/1 is
locked. Click Remove to disable port MAC address binding.
4.6.2.2.2
Click MAC address table configuration, MAC address binding configuration, Lock port,
Dynamic MAC converting. Users can convert the MAC address which is learned
dynamically to secure static IP address. See the equivalent CLI command at 4.5.1.2.2.2.
Port – Specify the port
For example: Select port Ethernet1/1, and then click Apply. The dynamic MAC
address of port Ethernet1/1 is converted to the secure static address. Click Reset to select
the new port
4.6.2.2.3
Click MAC address table configuration, MAC address binding configuration, Lock port,
Enable port security timeout. Users can lock the secure port. See the equivalent CLI
command at 4.5.1.2.2.4:
Port – Specify the port
Timeout Value (0-300 second) – Security timeout value
For example: Select port Ethernet1/1; set Timeout Value to 30 seconds, and then
click Apply. The security timeout value of port Ethernet1/1 is 30 second.
4.6.2.2.4
Click MAC address table configuration, MAC address binding configuration, Lock port,
Binding MAC. Users can add and delete secure static MAC address. See the equivalent

Dynamic MAC converting

Enable port security timeout

Binding MAC

141