Removal Of Protective Packaging Material - Oce CS9090 User Manual

3.3.4 Removal of protective packaging material

Remove all protective packaging material according to the following procedure.
Remove tape from all parts of the product.
Step 1 :
Remove the two anti-rubbing materials on the top of the main unit.
Step 2 :
Remove the head unit fixture material from inside the front cover according to the following
Step 3 :
procedure.
Open the front cover.
I)
Caution
Be careful not to pinch your fingers when opening and closing the front cover.
II) Remove the two wing bolts.
III) Remove the head unit fixture material.
AP-75036 - Revision 1.3 – 20/03/06
Anti-rubbing material
1
Front Cover
1
Wing bolt
1
Head unit fixture material
2
35
Chapter 3: Setting up the unit
User's Guide CS9000 series