Print On Special Material - Oce VarioPrint 2045-65 NC Job Manual

Print on special material

Introduction
You can use the following material for the print jobs (see 'Input trays, output
bins and materials' on page 182).
Paper from the trays.
■
Special material that you place in a tray for the current mailbox job.
■
Special material that you insert in the special feeder for the current mailbox
■
job.
Make sure that you place the material correctly in the paper trays and special
feeder (see 'Add paper to the paper trays' on page 166)(see 'Add paper to the
special feeder' on page 171).
The Key Operator can lock the paper-compartment door or disable the special
feeder. If the special feeder is disabled, you cannot select the special feeder in
the display screen.
In the Océ VarioPrint 2045-65 NC print command window, initiate a
Note:
print job on special material. Address the online help of the Océ VarioPrint
2045-65 NC printer driver for information about the options.
Before you begin
Start a mailbox job (see 'Start a mailbox job' on page 54)
■
Make sure that the materials have the correct specifications (see 'Input
■
trays, output bins and materials' on page 182).
60 Océ VarioPrint 2045-65 NC Job Manual