Table of Contents
Advertisement
4.3 REMOVE PROTECTIVE MATERIALS.
To ensure that nothing can be damaged during transport, temporary buffers and brackets are installed on the
printer. Remove them before powering ON the printer.
2
Step 1 :
Remove the protective film on the plexi front cover.
Step 2 :
Remove the two screws fixing the left maintenance cover.
Step 3 :
Remove the two buffers fixing the front plexi cover.
Step 4 :
Remove the two wing screws fixing the head carriage.
1
3
28
CS9200 Low Solvent series printers
4
AP-40301 – Rev. 2.0 – 02/05/2008
Advertisement
Table of Contents
