Paper Detection Menu; On Cleaning Menu - Oce CS9090 User Manual

Chapter 5: Handling the printer
5.4.4.3

Paper detection menu

To perform detection of width and edge of the media, when media has been initialized
Setup items Parameters
media detect <Normal>
OFF
Take-up mechanism
RollFeed
-
Notes
•
The default setting is 'Rollfeed' as a result of the standard unwinder / winder 100 with your unit.
•
When setting "Take-up Mechanism" on the Media Detection menu, the following limits are applied to
the operation of the product.
For initial media, only the media width is detected.
o
Under normal conditions, media cannot be sent backward.
o
The media cannot be moved forward or backward from the Origin Setting menu.
o
The settings in the Media Cut menu are disabled, and the settings are changed to "Off". (Refer to
o
'Media cut menu')
5.4.4.4

On cleaning menu

Set when cleaning should be performed automatically when the power is turned on.
Setup items Parameters
Power on <Off>
cleaning
Little
Normal
Powerful
-
AP-75036 - Revision 1.3 – 20/03/06
Description
To perform media detection automatically.
No media detection.
Should be selected when using the winding system and media is
most right loaded.
Should be selected when using the winding system and media is
center loaded
• [CANCEL] key: to shift to the previous hierarchy menu.
Description
Power on cleaning is not performed.
Power on cleaning is performed.
To shift to the previous hierarchy menu.
110 User's Guide CS9000 series