Polycom RMX 1500 Administrator's Manual page 1053

6
Click the SIP Servers tab.
7
In the SIP Server, select Specify.
8 In the SIP Server Type, select Microsoft.
9
Enter the IP address of the Office Communications Server 2007 or
Lync Server 2010 and the Server Domain Name as defined in the OCS/
Lync Server and in the Management Network for the DNS.
10 If not selected by default, change the Transport Type to TLS.
The Create Certificate and Send Certificate buttons are enabled.
11 If you are using the CSR method, and the CSR option is not selected
by default, change the Certificate Method to CSR.
If you are using the PFX method, in the Certificate Method field select
PEM/PFX.
At this point the procedure changes according to the selected
certificate method.
If you have selected PEM/PFX, skip to step 27 on page H-90.
Chapter H-Setting the RMX for Integration Into Microsoft Environment
H-85