Replacing The Waste Fluid Bottle Assembly (Falcon Ii Outdoor 4H) - MUTOH Falcon II Outdoor Maintenance Manual

4.11.2. Replacing the waste fluid bottle assembly (Falcon II Outdoor 4H)

Notes :
Step 1 :
Remove the waste fluid bottle assembly.
Caution :
Waste ink will remain inside the tubes. Be careful that the ink is not spilled from the tube
onto the printer or items close to the printer.
When replacing the waste fluid bottle assembly, be sure to perform following
operation to clear the counter. "High ink initialization" or " Cleaning initialization":
refer to "Counter Initialization Menu"
Falcon II Outdoor series printers – Maintenance Manual
138 AP-74065, Rev. 1.0, 21/11/03