Replacing The Flushing Box Assembly - MUTOH Falcon II Outdoor Maintenance Manual

4.5.9. Replacing the flushing box assembly

Notes :
Step 1 :
Unlock the head.
Notes :
Step 2 :
Move the carriage from the capping position to the left.
Step 3 :
Remove the screw fixing the flushing box assembly.
1 = Flushing box assembly
Step 4 :
Remove the tube from the flushing box assembly.
Step 5 :
Replace the flushing box assembly.
Step 6 :
Reinstall all parts in the opposite order of the removal procedure.
Step 7 :
Adjust the head and flushing box assembly so that they do not come into contact.
Remove following covers before replacing the flushing box assembly.
Side cover R: refer to "Removing side cover R"
Side cover L: refer to "Removing side cover L"
Front cover: refer to "Removing the front cover"
Carriage cover: refer to "Removing the carriage cover"
Y rail cover: refer to "Removing the Y rail cover"
Refer to 'Head Lock Menu'
Falcon II Outdoor series printers – Maintenance Manual
2 = Screw (M3x8) fixing the flushing box assembly
89 AP-74065, Rev. 1.0, 21/11/03