Replacing The Waste Bottle Fluid Sensor Assembly - MUTOH Rockhopper 38 Maintenance Manual

4.4.6 Replacing the Waste Bottle Fluid Sensor Assembly

Remove the waste fluid bottle
Step 1 :
Disconnect connector
Step 2 :
Remove the Waste Fluid Bottle Sensor Assembly. (2 fastening screws)
Step 3 :
Assembling is the reverse of the removal procedure.
Step 4 :
Caution :
Be careful not to over-tighten when mounting the Waste Fluid Bottle Sensor
Assembly.
Rockhopper 38 – Maintenance Manual
58
AP-74038, Rev. 1.1, 25/01/05