Removing The Panel Unit Assembly - MUTOH Falcon II Outdoor Maintenance Manual

4.2.6. Removing the panel unit assembly

Step 1 :
Remove side cover R.
Step 2 :
Remove the panel tape power cord.
Step 3 :
Remove the 4 screws fixing the panel base.
1 = Panel unit assembly
3 = Tape wire
Step 4 :
Remove the panel unit assembly.
Step 5 :
Remove the 6 screws fixing the panel board assembly and the panel cover.
1 = Screws (M3x8) fixing the panel cover
Step 6 :
Remove the panel cover.
Falcon II Outdoor series printers – Maintenance Manual
2 = Screws (M3x6) fixing the panel unit assembly
44 AP-74065, Rev. 1.0, 21/11/03