Replacing The Pf_Enc Assembly And Pf Scale Assembly - MUTOH Falcon II Outdoor Maintenance Manual

4.5.2. Replacing the PF_ENC assembly and PF scale assembly

Step 1 :
Remove the PF_ENC assembly connector.
Step 2 :
Remove the 2 screws fixing the PF encoder installation board.
1 = Bearing
3 = PF scale
Step 3 :
Remove the PF encoder installation board.
Step 4 :
Remove the bearing.
Step 5 :
Remove the 4 screws fixing the PF scale installation board.
Step 6 :
Remove the PF scale installation board.
Step 7 :
Replace the PF scale assembly.
Notes :
Remove the following covers before replacing the PF_ENC assembly.
Side cover L: refer to "Removing side cover L"
78
Falcon II Outdoor series printers – Maintenance Manual
2 = Screws (M3x6) fixing the PF scale installation
board
4 = Screws (M4x10) fixing the PF encoder installation
board
AP-74065, Rev. 1.0, 21/11/03