Removing The Y Rail Cover - MUTOH Falcon II Outdoor Maintenance Manual

4.2.7. Removing the Y rail cover

Step 1 :
Remove side cover R.
Step 2 :
Remove side cover L.
Step 3 :
Remove the front cover.
Step 4 :
Remove the carriage cover.
Step 5 :
Remove the 3 screws fixing the Y rail cover and the Y rail cover FG.
1 = Y rail cover FG
Caution :
Removing the Y rail cover, should be performed by at least two persons.
Otherwise the Y rail cover may be deformed.
Caution :
Please note that this cover is only on a Falcon II Outdoor (2 heaters) printer.
2 = Screws (M3x6) fixing the Y rail cover and the Y rail cover FG
46
Falcon II Outdoor series printers – Maintenance Manual
AP-74065, Rev. 1.0, 21/11/03