Replacing The Pump Assembly - MUTOH Falcon II Outdoor Maintenance Manual

4.9.2. Replacing the pump assembly

Step 1 :
Follow the instructions in "Replacing the pump assembly " to remove the pump assembly.
Step 2 :
Remove the screw fixing the pump assembly.
1 = Pump assembly
Step 3 :
Replace the pump assembly.
Step 4 :
Reinstall all parts in the opposite order of the removal procedure.
Notes :
Follow the instructions in "Pump tubing layout for pump assembly" to connect the
tube.
Falcon II Outdoor series printers – Maintenance Manual
2 = Screws (M3x6) fixing the pump assembly
131 AP-74065, Rev. 1.0, 21/11/03