Replacing Waste Fluid Box - MUTOH ValueJet VJ-1204 Quick Reference

4.1.2

Replacing waste fluid box

This sub-section describes the replacement time and steps of waste fluid box.
(1) Replacement time
Replace waste fluid box when the following situation occurs.
a. If "NearFullWasteInkTank" is displayed on the operation panel
• Waste fluid box shortly becomes full.
• Printing operation continues.
• Replace the waste fluid box.
b. If "FullWasteInkTank" is displayed on the operation panel
• The waste fluid box is full.
• Printing operation stops.
• Immediately replace the waste fluid box.
(2) Type
The waste fluid box that can be used with this printer is as follows.
Waste fluid box
(3) Replacing steps
Follow the procedure below to replace the waste fluid box.
WARNING
• The waste fluid from the printer is industrial waste. Proper waste fluid disposal
according to industrial waste disposal laws and ordinances of your local government
is required. Consign disposal of waste fluids to a specialized processor.
1. Confirm that the printer is turned ON.
2. Pull out the waste fluid box.
No.
1
4 Daily maintenance
Description
Waste fluid box
Model No.
VJ12-HEB
Name
VJ-1204 QUICK REFERENCE
1
4-5