5.1. INTRODUCTION
This chapter provides information on the self-diagnosis function.
The self-diagnosis function adjusts the printing accuracy. It is used in the manufacturing process, adjustment and
maintenance.
The self-diagnosis function is implemented in the system firmware. All functions are available from the operation panel.
Notes :
Refer to "Part names and functions ".
5.2. PREPARATION
Before you can use the self-diagnosis function, you should make the machine ready and display the self-diagnosis menu.
5.2.1. Preparations on Machine
Before starting up the self-diagnosis function, perform following preparations:
(1) Setting printing media
Set a roll media for adjustment.
Notes :
In the self-diagnostic mode, pressing the [ENTER] key in the Diagnosis menu
moves the lever up and down.
In the self-diagnostic mode, pressing the [CANCEL] key in the Diagnosis menu cuts
the media.
When the self-diagnosis menu has been displayed, roll media is automatically set as
the type of media.
Make sure to use double vinyl media for the adjustment purpose.
Falcon II Outdoor series printers – Maintenance Manual
5. SELF-DIAGNOSIS FUNCTION
147
AP-74065, Rev. 1.0, 21/11/03