Removing The Carriage Cover - MUTOH Falcon II Outdoor Maintenance Manual

4.2.5. Removing the carriage cover

Step 1 :
Remove the I/H cover.
Step 2 :
Remove side cover R.
Step 3 :
Remove side cover L.
Step 4 :
Remove the front cover.
Step 5 :
Remove the 4 screws fixing the carriage cover.
Step 6 :
Remove the carriage cover.
1 = Carriage cover
Step 7 :
Reinstall all parts in the opposite order of the removal procedure.
Caution :
Please note that this cover is only on a Falcon II Outdoor (2 heaters) printer.
43
Falcon II Outdoor series printers – Maintenance Manual
2 = Screws (M3x6) fixing the carriage cover
AP-74065, Rev. 1.0, 21/11/03