Replacing Accessory Unit; Replacing Level Switch (Waste Fluid) - MUTOH ValueJet Service Manual

4.11 Replacing Accessory Unit

4.11.1 Replacing Level Switch (Waste Fluid)

1. Remove the level switch (waste fluid) from connector.
1
2
2. Remove the level switch (waste fluid) from the cap of the waste fluid bottle assembly.
3. Remove the level switch (waste fluid).
4. To reassemble the unit, reverse the removal procedure.
AP-74109 Rev 1.1
表 4-118
No.
1
2
4-102
ValueJet 1304 Service manual
Part name
Level switch (waste fluid)
VJ16
Connector