Replacing Supports And Scroller; Replacing The Waste Fluid Bottle Assembly - MUTOH spitfire 90 Maintenance Manual

Hide thumbs Also See for spitfire 90:

Table of Contents

4.11. REPLACING SUPPORTS AND SCROLLER

Remove the waste fluid bottle assembly.

Waste ink will remain inside the tubes. Be careful that the ink is not spilled from the tube

onto the printer or items close to the printer.

When replacing the waste fluid bottle assembly, be sure to perform following

operation to clear the counter. "High ink initialization" or " Cleaning initialization":

refer to "Counter Initialization Menu"

Spitfire – Maintenance Manual

AP-74096, Rev. 1.0, 09/06/05