Cw Adjustment - MUTOH Falcon II Outdoor Maintenance Manual

7.9. CW ADJUSTMENT

Step 1 :
Start the self-diagnostic function.
Notes :
Refer to "Self-Diagnosis Function".
Step 2 :
Select "Adj:Uni-D".
Step 3 :
Print CW adjustment pattern.
Step 4 :
Enlarge using a magnifying glass. Adjust each head until the dotted line on printing A in following figure
becomes straight using head 1 as a reference.
Notes :
For 87-inch specifications, the heads 5-A, 5-B, 6-A, 6-B, 7-A, 7-B, 8-A, 8-B are
added.
In the event that all parts of the unit do not line up due to part or assembly precision
error, make adjustments until everything in the area around the center lines up in a
straight line.
Falcon II Outdoor series printers – Maintenance Manual
1 = Reference head
245 AP-74065, Rev. 1.0, 21/11/03