Heater System Menu; Heater Status Menu; Heater Temperature Menu - MUTOH Falcon II Outdoor Maintenance Manual

5.11. HEATER SYSTEM MENU

This section describes the heater system menu.
This menu is used to evaluate the heating elements of the printer.
Initialization item Description
Status This menu displays the status of the heating system.
Temperature This menu displays the real temperature of the heating
elements.
Test 30 This menu heats the temperature up to 30°C.
Test 50 This menu heats the temperature up to 50°C.
Test Max This menu heats the temperature up to the maximum
temperature.
Version This menu displays the version of the control heater
board.
Adjust For calibration of the heaters.
For future use only!
* Heating System *
F1 → Status
F3 → Test 30
* Heating System *
F1 → Test Max
F3 → Adjust

5.11.1. Heater Status Menu

This menu displays the status of the heating system.
* Status *
Heater Standby
No errors

5.11.2. Heater Temperature Menu

This menu displays the real temperature of the heating elements.
* Temperature *
A : R25
B1 : R24
D1 : R26
Falcon II Outdoor series printers – Maintenance Manual
Temperature
Test 50
(1/2)
Version
(2/2)
B2 : R24 C : R25
D2 : R26
212
Refer to
→ Heater Status Menu
→ Heater Temperature
Menu
→ Heater Test 30 Menu
→ Heater Test 50 Menu
→ Heater Test Max Menu
→ Heater Version Menu
→ Heater Adjust Menu
← F2
← F4
← F2
AP-74065, Rev. 1.0, 21/11/03