5.5.10. Test print menu
In this menu, you can print out adjustment patterns for checking various adjustment items.
Make adjustments following the steps below.
Step 1 :
Set media as necessary.
Step 2 :
After media has been set, the machine prints out the following test Printings.
Nozzle check: Head nozzle check pattern
Adjustment variables: Set values of various adjustment variables
Step 3 :
Perform selected test print.
* Send Pitch *
Pattern 1
* Pattern 1 *
Adjustment print
Falcon II Outdoor series printers – Maintenance Manual
Pattern 2
↓ If "Pattern 1" is selected
181
AP-74065, Rev. 1.0, 21/11/03