Tools Required For Work; Installation Procedure - MUTOH Falcon II Outdoor Maintenance Manual

7.4.1. Tools required for work

The following tools are required to install firmware.
Flash memory card or compatible computer
Notes :

7.4.2. Installation procedure

The procedure for installing firmware is explained below.
Use the following procedure to install firmware.
Important :
Refer to "Jig and Tool list".
Before replacing parts, be sure to perform following operations.
Turn the machine power OFF.
Remove the product's electrical plug from the socket. Otherwise, you
may suffer electric shock or the machine's electric circuits may be
damaged.
Disconnect all cables from the machine. Not doing so could cause damage to
the printer.
Falcon II Outdoor series printers – Maintenance Manual
232 AP-74065, Rev. 1.0, 21/11/03