Removing The - MUTOH Falcon II Outdoor Maintenance Manual

4.2.4. Removing the front cover
Step 1 :
Open the front cover.
Step 2 :
Remove the E ring on the left side.
Step 3 :
Remove the 4 screws on the left and right cover spindles.
1 = E ring
Step 4 :
If the machine is a 50-inch model, remove cover spindle L, and then slide and remove the front cover.
1 = Cover spindle L
Falcon II Outdoor series printers – Maintenance Manual
2 = Screws (M3x8) on the left and right cover spindles
41 AP-74065, Rev. 1.0, 21/11/03