Parameter Menu; Parameter Initialization Menu - MUTOH Falcon II Outdoor Maintenance Manual

5.8. PARAMETER MENU

In this menu, you can modify the set values of various adjustment items (adjustment parameter).
The Parameter menu includes the following items.
Initialization item
Initialize.
Update
F1 →

5.8.1. Parameter Initialization Menu

This menu initializes the adjustment parameters. The parameters that can be initialized in this menu are as follows.
Capping position
Media feed distance
Serial number
Head history
Wiper history
Waste ink history
CR motor history
PF motor history
Initialization of all items
F1 →
F3 →
F1 →
F3 →
Description
Initializes the adjustment parameters.
Updates the adjustment parameters.
* Parameter *
Initialize
* Initialize *
P. FeedLen
Head
* HeadSlant *
Waste ink
PF motor
↓ Select item (P. FeedLen.)
* P. FeedLen. *
Initialize OK ?
↓ ENTER
* P. FeedLen. *
Initialize Parameter
189
Falcon II Outdoor series printers – Maintenance Manual
Update ← F2
serialNo. ← F2
Wiper ← F4
(1/2)
CR motor ← F2
All ← F4
(2/2)
Refer to
Parameter Initialization
Menu
Parameter Update Menu
AP-74065, Rev. 1.0, 21/11/03