Replacing The Cleaner - MUTOH Falcon II Outdoor Maintenance Manual

Step 11 :
Move the cursor to the opposite side of the origin.
Step 12 :
Cap once.
Step 13 :
Use a mirror to check that the cap does not impinge on the nozzle.
1 = Print head (nozzle face)
3 = Cap trace
Step 14 :
Reinstall all parts in the opposite order of the removal procedure.

4.8.2. Replacing the cleaner

Step 1 :
Follow step 1 to 3 in "Replacing the maintenance assembly" to remove the side plate T.
Step 2 :
Lift up the hooks slightly and remove the cleaner from the wiper arm.
1 = Wiper arm
3 = Hook
Step 3 :
Replace the cleaner.
Falcon II Outdoor series printers – Maintenance Manual
2 = Nozzle
4 = Mirror
2 = Cleaner
126 AP-74065, Rev. 1.0, 21/11/03