Transportation Of Machine - MUTOH Falcon II Outdoor Maintenance Manual

8.7. TRANSPORTATION OF MACHINE

This section explains transferring and transporting the printer.
When you transport the printer, the printer should be repackaged using the original box and packing materials, to protect it
from vibration or impact.
Transport the printer following the procedures below.
(1) Task before transportation
Step 1 :
Turn on the power to the product.
Step 2 :
Verify if the product is at a normal status.
Step 3 :
Start the auto-diagnostic function.
Notes :
Refer to "Self-Diagnosis Function".
Step 4 :
Select "Adj:CleanHead".
Step 5 :
Select "CleanHead" menu.
Notes :
Refer to "Head wash menu".
Step 6 :
When the head cleaning has been finished, turn the power OFF.
Step 7 :
Remove the scroller.
Step 8 :
Disconnect the power cable and all other cables.
Step 9 :
Install the protective materials.
Notes :
Refer to the User's Guide.
Step 10 :
Remove the product from the special stand.
Falcon II Outdoor series printers – Maintenance Manual
274 AP-74065, Rev. 1.0, 21/11/03