Replacing The P_Rear_R Sensor Assembly And P_Rear_L Sensor Assembly - MUTOH Falcon II Outdoor Maintenance Manual

4.5.5. Replacing the P_REAR_R sensor assembly and P_REAR_L sensor
assembly
Step 1 :
Remove the connectors for the P_REAR_R sensor assembly and P_REAR_L sensor assembly from the
Mainboard assembly.
Step 2 :
Remove the screw fixing the media sensor installation board.
1 = Media sensor installation board
Step 3 :
Remove the media sensor installation board.
Step 4 :
Remove the 2 screws fixing the P_REAR_R sensor assembly.
Notes :
Remove following covers before replacing the P_REAR_R sensor assembly and
P_REAR_L sensor assembly.
Side cover R: refer to "Removing side cover R"
Side cover L: refer to "Removing side cover L"
Front cover: refer to "Removing the front cover"
Carriage cover: refer to "Removing the carriage cover"
Y rail cover: refer to "Removing the Y rail cover"
Media guide F: refer to "Removing media guide F"
82
Falcon II Outdoor series printers – Maintenance Manual
2 = Screw (M3x8) fixing the media sensor installation board
AP-74065, Rev. 1.0, 21/11/03