Errors Requiring Restart - MUTOH Falcon II Outdoor Maintenance Manual

9.2.6. Errors requiring restart

The following explains the messages, items to be confirmed and remedies to take when errors requiring restart occur while
the product is operating.
Errors requiring restart are displayed when trouble critical to the operation of this product occurs.
Foreign material disturbing the printer operation has been loaded in the printer.
An electrical circuit (such as board, motor or sensor) failure has occurred.
An error on control program of the printer has occurred.
When errors requiring restart occur.
The product stops operation after the following actions take place.
1. The power supply to the operation has been automatically shut-off.
2. All lamps on the operation panel flash and the buzzer sounds intermittently.
3. Error messages are displayed on the operation panel.
If an error requiring a restart has occurred, solve the problems to restart the printer and delete the error.
(1) CPU system critical errors
No. Message
1 E 001 error
DRAM
2 E 002 error
Opt. DRAM
Phenomenon Check point
Standard DRAM (1) Mainboard
error : Abnormal assembly may be
condition in defective.
standard memory
mounted on
Mainboard
assembly
Option DRAM error : (1) If foreign
Abnormal condition material is present
in optional memory in the slot (J103) of
mounted on the extended
Mainboard memory, errors
assembly may result.
(2) Install known
good optional
memory (the
capacity must be
equal to the one in
the user's unit)
then check the
equipped memory
capacity via
"Test:Ram
Capacity" of the
self-diagnostic
function.
(3) Mainboard
assembly may be
defective.
Falcon II Outdoor series printers – Maintenance Manual
Action
• Replace
Mainboard
assembly
• Remove dust
using a tool such
as air duster, then
reinstall the
memory.
• Replace memory.
• Replace
Mainboard
assembly
290
Refer to
→ Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV
board assembly
and cooling fan
assembly.
→ Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV
board assembly
and cooling fan
assembly.
AP-74065, Rev. 1.0, 21/11/03